|
|---|
Wednesday, June 22, 2011
Change the oil in your car of the vehicle is a fairly simple process, at a price cheaper than can be in a shop for service and save hundreds of dollars made each year. Each vehicle is built differently, which means that all oil filters and spark plugs will be located in one place. Vary the amount of oil can, so make sure you check the manual before you begin the oil change, make sure you have enough to time all the equipment you are ready to begin, have, and should back up and running in about an hour and a half.
Everyone has their favorite brands and types of products, you need to find the most suitable for you and your vehicle. Five to six liters of oil are used in the rule, but must be controlled by the type of vehicle. You need an oil pan, preferably something that can be closed easily for oil. Oil filters should be replaced when changing the oil and oil filters have a key, it is much easier to remove.
The first step is to change the oil, oil filter cap, which is where you pour the new oil openly. This will help with drainage, because the air through. Then there is the engine pan plug, under the car, where the old oil flow. Make sure the container under the cap and allow oil to drain completely leaving out of the car. This can take up to an hour, but it is important to make sure that all the old oil out.
Remove the filter with the main oil. It can be difficult to remove, but if you do it for me, it should come off easily. Before the start of the new oil filter, new oil rubbed around the top of it so it will seal properly. You can also pour a little oil in the filter, which helps the car the oil pressure rapidly corrected.
Use a new washing machine and replace the drain plug. Now, fresh oil under the hood of the vehicle adds. Once everything is clean and reassemble the machine and let it run for about five minutes. Make sure the oil pressure is off and losses under the car. The oil every three months or 3,000 miles, it is necessary.
